Motor driver built-in 2 axes motor controller

RoHS

SC-021

CRUX/CRUX-A is a 2 axes stage controller with a built-in micro step 5-phase stepper motor driver.
Low price was actualized comparing to the existing SC series with fewer functions.
Using the handy terminal "INCOM" sold separately, operations such as test run, adjustment, etc. can be performed asily without PC.

 

[ Features ]


Micro Step Drive with 250 Divisions at Maximum

micro step running driver is equipped as standard.Actualized smooth and low vibration drive, and high precision positioning.
By changing the system parameters for CRUX and setting the built-in driver rotary switch for CRUX-A, settings to 16 types and 250
number of divisions at maximum are possible. Also, two rotary switches settings are equipped in CRUX-A, and one can be selected
externally with a division selection signal (D.S).

 

Switchable Motor Drive Current
For CRUX, 0.35A/phase and 0.75A/phase can be switched by changing the system parameter. For CRUX-A, the built-in driver
rotary switch setting can switch 16 types between 0.35A/phase and 1.48A/phase.

 

RS-232C, USB 2 Types of Communication Ports
CRUX/CRUX-A is controlled with a command from host controller (PC, etc.) through the communication port.
Two selectable communication ports, RS-232C and USB, are equipped. Baud rate of RS-232C and USB can be set with the rotary
switch on the rear panel.

 

* Attached a power supply cable is for using in Japan. Please provide it by customer when a different power supply cable is necessary.(~125V)

Model Product Type Driving Current Price Quantity RFQ
CRUX 5-phase stepper motor controller (Built-in DC power supply driver) Parameter settings
Switch 0.35A/phase and 0.75A/phase
¥115,000
CRUX-A 5-phase stepper motor controller (Built-in AC power supply driver) Rotary switch settings
Select from 16 types between 0.35A and 1.48A/phase
¥165,000
INCOM Driving with Handy Terminal - ¥21,000


Driving with Handy Terminal [ INCOM ]

Using a handy terminal, "INCOM" (sold separately), stage operation is easily possible. Origin
return, continuous or relative drive, speed change (HI speed/LOW speed/1 pulse sending)
  CRUX

Specifications

General

Model CRUX CRUX-A
Outward Appearance CRUX CRUX-A
Product Type 5-phase stepper motor controller
(Built-in DC power supply driver)
5-phase stepper motor controller
(Built-in AC power supply driver)
Dimension (mm) W128.4xH58.4xD220 W180xH158xD214
Number of Axes 2
Power Supply AC90~240V、50/60Hz
Consumption Power 60VA MAX
(At AC100V supply)
430VA MAX
(At AC100V supply)
Operating Enviroment Operating temperature: 0〜40℃
Operating humidity: 30〜85% (should be no condensation)
Weight (kg) 1.4 3.3

 

Function

Model CRUX CRUX-A
Motion Control Absolute position drive, Relative position drive,
2 axes simultaneous drive, Origin return drive, Continuous drive
Velocity Control  · Drive pulse frequency : 1 pps ~ 500 kpps
 · Acceleration/Deceleration pattern : Rectunglar drive , Trapezoidal drive    (Acceleration/Deceleration is symmetrical)
 · Others : Speed table with 10 type
Set Movement amount On relative position drive
On absolute position drive
Home Position Return 10 types (combination of ORG, NORG, CW limit, and CCW limit)
Output Signal  · Motor excitation signal
 · Emergency Stop signal [open collector output]
Input Signal  · Sensor signal (CW limit, CW limit, NORG "Origin proximity", and ORG "Origin")
           [12V pull up photocoupler input]
 · Emergency stop signal [24V pull up photocoupler input]
Display Sensor condition, BUSY condition, Emergency stop condition LED
Accessories  · CD-ROM (USB device driver, Operation manual)
 · Power supply cable (2m), Emergency stop signal short plug
Option INCOM (External operation box for CRUX/CRUX-A) Price: ¥21,000

 

 

Driver Specification

Model CRUX CRUX-A
Model DS507F-2 (2 units) MD-551E (2 units)
Driving Motor 5-phase stepper motor
Driving Method Bipolar constant current pentagon
Driving Current Parameter settings
Switch 0.35A/phase and 0.75A/phase
Rotary switch settings
Select from 16 types between 0.35A and 1.48A/phase
Micro-Step Division 16 types, Parameter settings
1,2,2.5,4,5,8,10,20,25,40,50,80,100,125,200,250
16 types, rotary switch settings
(2 types in M1 and M2)
1,2,4,5,8,10,20,40,80,16,25,50,100,125,200,250
Others Function 励磁OFF、STOP電流調整等 励磁OFF、STOP電流調整等
Others Function Excitation OFF, Stop current adjustment Excitation OFF, Stop current setting
 

  

System configuration

CRUX-System

 

CRUX Dimension Drawing

CRUX図面

CRUX-A Dimension Drawing

CRUX

[NEW] Driver Included