SXA0750-R01

Positioning Stages 【 Montblanc Series 】

Catalog data PDF View

※Actual cable length differs from the image

Price ASK

Drawings file

Drawing For Download

Connect Fig File

Specification (Mechanical)

Model Number

SXA0750-R01

Mirror Model Number

SXA0750-R01-R

Table Size

75mm×100mm

Guide Mechanism

Cross Roller Guide

Motion Range

±25mm

Lead Mechanism

Ball Screw, Lead 1.0mm

Resolution　Full/Half Step

1μm/0.5μm

Resolution　Micro Step (1/20 div)

0.05μm

Maximum Speed

10mm/sec (Half 20kpps)

Accumulated Lead Error

≦ 12μm/50mm

Repeatability

≦±0.3μm

Lost Motion

≦ 1.0μm

Straightness (Horizontal)

≦ 1.5μm/50mm

Straightness (Vertical)

≦ 1.5μm/50mm

Backlash

≦ 0.2μm

Moment Load Stiffness

0.045 arcsec/N cm

Load Capacity

196N (20kgf)

Material

Aluminum Alloy

Finishing

Clear Matt Anodizing

Weight

0.95kg

Specification (Electrical)

Sensor Model

F-115(HOME, LIMIT), Mirror Model: F-115R(HOME, LIMIT)

Motor Shaft Diameter

Φ5mm , Conformance option handle：A type

5 Phase Stepper Motor

Oriental motor: PK524HPMB

Connector

20Pin Round (Hirose: RP13A-12JG-20PC)

2 phase stepper motor is available

SXA0750-R01-BM

2 Phase Stepper Motor

Oriental motor: PKP225D15B2

2 Phase Stepper Motor Connector

20Pin Round (Hirose: RP13A-12JG-20PC)

Overhaul Price

not supported

*Additional parts cost is not included on Overhaul Price

Lubricant Change Option

Clean Room Lubricant Change Price ("-C" at the end of model number)

cannot be exchanged

Vacuum Lubricant Change Price ("-V" at the end of model number)

cannot be exchanged

Motor Change Option

Same Size Motor Change Price

ASK

Different Size Motor Change Price

ASK

*The Motor cost is not included on Motor Change Price

Control Electronics

Motor Controller

See the corresponded motor controller

Motor Driver

See the corresponded motor driver

Motor Cable

See the corresponded motor cable

Accessory

See the corresponded accessory as like spacer or bracket

Remarks and Features

●New product: “SX Stage” series with low cost, high accuracy, and short delivery time.
●Long stroke automatic X stage with Cross Roller Guide.
●Clean grease is used.
●The feed system uses ball screws for superior durability.
●5-phase stepping motor used.
●Area (datum) sensor is used for homing. light-entering at all times on CW side.
●Use of KOSMOS series controllers is recommended.
●Ultra high resolution typeUse a cable for 5 motor leads.

Back to List