SXA1075-R01

Positioning Stages 【 Montblanc Series 】

Catalog data PDF View

※Actual cable length differs from the image

Price ASK

Drawings file

Drawing For Download

Connect Fig File

Specification (Mechanical)

Model Number

SXA1075-R01

Mirror Model Number

SXA1075-R01-R

Table Size

100mm×120mm

Guide Mechanism

Cross Roller Guide

Motion Range

±37.5mm

Lead Mechanism

Ball Screw, Lead 1.0mm

Resolution　Full/Half Step

2μm/1μm

Resolution　Micro Step (1/20 div)

0.1μm

Maximum Speed

20mm/sec (Half 20kpps)

Accumulated Lead Error

≦ 14μm/75mm

Repeatability

≦±0.3μm

Lost Motion

≦ 1.0μm

Straightness (Horizontal)

≦ 2μm/75mm

Straightness (Vertical)

≦ 2μm/75mm

Backlash

≦ 0.2μm

Moment Load Stiffness

0.017 arcsec/N cm

Load Capacity

343N (35kgf)

Material

Aluminum Alloy

Finishing

Clear Matt Anodizing

Weight

1.8kg

Specification (Electrical)

Sensor Model

F-115(HOME, LIMIT), Mirror Model: F-115R(HOME, LIMIT)

Motor Shaft Diameter

Φ5mm , Conformance option handle：A type

5 Phase Stepper Motor

Oriental motor: C090P-9015P

Connector

20Pin Round (Hirose: RP13A-12JG-20PC)

2 phase stepper motor is available

SXA1075-R01-BM

2 Phase Stepper Motor

Oriental motor: PKP244D15B2

2 Phase Stepper Motor Connector

20Pin Round (Hirose: RP13A-12JG-20PC)

Overhaul Price

not supported

*Additional parts cost is not included on Overhaul Price

Lubricant Change Option

Clean Room Lubricant Change Price ("-C" at the end of model number)

cannot be exchanged

Vacuum Lubricant Change Price ("-V" at the end of model number)

cannot be exchanged

Motor Change Option

Same Size Motor Change Price

ASK

Different Size Motor Change Price

ASK

*The Motor cost is not included on Motor Change Price

Control Electronics

Motor Controller

See the corresponded motor controller

Motor Driver

See the corresponded motor driver

Motor Cable

See the corresponded motor cable

Accessory

See the corresponded accessory as like spacer or bracket

Remarks and Features

●New product: “SX Stage” series with low cost, high accuracy, and short delivery time.
●Long stroke automatic X stage with Cross Roller Guide.
●Clean grease is used.
●The feed system uses ball screws for superior durability.
●5-phase stepping motor used.
●Area (datum) sensor is used for homing. light-entering at all times on CW side.
●Use of KOSMOS series controllers is recommended.
●Ultra high resolution typeUse a cable for 5 motor leads.

Back to List