Positioning Stages
【 Montblanc Series 】
XA10F-R102
Price
ASK
-
Drawings fileDrawing For Download
Connect Fig File
Specification (Mechanical)
Model Number
XA10F-R102
Mirror Model Number
XA10F-R102-R
Table Size
100mm×100mm
Guide Mechanism
Cross Roller Guide
Motion Range
±12.5mm
Lead Mechanism
Ground Screw, Lead 0.5mm
Resolution Full/Half Step
0.5μm/0.25μm
Resolution Micro Step (1/20 div)
0.025μm
Maximum Speed
2.5mm/sec
Accumulated Lead Error
≦ 8μm/25mm(AVE.1.15μm/25mm)
Repeatability
≦±0.3μm (AVE. ±0.04μm)
Lost Motion
≦ 1μm (AVE. 0.2μm)
Straightness (Horizontal)
≦ 0.5μm/25mm(AVE. 0.13μm/25mm)
Straightness (Vertical)
≦ 0.5μm/25mm(AVE. 0.12μm/25mm)
Backlash
≦ 0.5μm (AVE. 0.13μm)
Moment Load Stiffness
0.01 arcsec/N cm (AVE. 0.004 arcsec/N cm)
Load Capacity
196N (20kgf)
Material
Steel
Finishing
Nickel Plating
Weight
2.75kg
Specification (Electrical)
Sensor Model
F-101(HOME, LIMIT)
Motor Shaft Diameter
Φ5mm , Conformance option handle：A type
5 Phase Stepper Motor
Oriental motor: PK544PMB
Connector
20Pin Round (Hirose: RP13A-12RA-20PC)
2 phase stepper motor is available
XA10F-R102-BM
2 Phase Stepper Motor
Oriental motor: PKP244D15B
2 Phase Stepper Motor Connector
20Pin Round (Hirose: RP13A-12RA-20PC)
Overhaul Price
ASK
Lubricant Change Option
Clean Room Lubricant Change Price ("-C" at the end of model number)
ASK
Vacuum Lubricant Change Price ("-V" at the end of model number)
ASK
Motor Change Option
Same Size Motor Change Price
ASK
Different Size Motor Change Price
ASK
Control Electronics
Motor Controller
See the corresponded motor controller
Motor Driver
See the corresponded motor driver
Motor Cable
See the corresponded motor cable
Remarks and Features
●Motorized X stage with Cross Roller Guide.
●The feed system uses high-resolution grinding screws.
●5-phase stepping motor used.
●Use of KOSMOS series controllers is recommended.
