Positioning Stages
【 Montblanc Series 】
XA16A-R101
Price
ASK
-
Drawings fileDrawing For Download
Connect Fig File
Specification (Mechanical)
Model Number
XA16A-R101
Mirror Model Number
XA16A-R101-R
Table Size
160mm×124mm
Guide Mechanism
Cross Roller Guide
Motion Range
±30mm
Lead Mechanism
Ground Screw, Lead 1.0mm
Resolution Full/Half Step
2μm/1μm
Resolution Micro Step (1/20 div)
0.1μm
Maximum Speed
10mm/sec※When using a driver with an input power supply of 100 VAC specifications
Accumulated Lead Error
≦ 10μm/60mm(AVE. 5.24μm/60mm)
Repeatability
≦±0.5μm (AVE. ±0.13μm)
Lost Motion
≦ 2μm (AVE. 0.89μm)
Straightness (Horizontal)
≦ 1μm/60mm(AVE. 0.26μm/60mm)
Straightness (Vertical)
≦ 2μm/60mm(AVE. 0.28μm/60mm)
Backlash
≦ 1μm (AVE. 0.21μm)
Moment Load Stiffness
0.01 arcsec/N cm (AVE. 0.005 arcsec/N cm)
Load Capacity
294N (30kgf)
Material
Aluminum Alloy
Finishing
Clear Matt Anodizing
Weight
3.6kg
Specification (Electrical)
Sensor Model
F-101(HOME, LIMIT)
Motor Shaft Diameter
Φ8mm , Conformance option handle：B type
5 Phase Stepper Motor
Oriental motor: C087Q-9215P
Connector
20Pin Round (Hirose: RP13A-12RA-20PC)
2 phase stepper motor is available
XA16A-R101-BM※ Additional cost available Connector type changes.
2 Phase Stepper Motor
Oriental motor: PK264JDB
2 Phase Stepper Motor Connector
20Pin Square (Hirose: PC-1620, P-1620A-STA)
Overhaul Price
ASK
Lubricant Change Option
Clean Room Lubricant Change Price ("-C" at the end of model number)
ASK
Vacuum Lubricant Change Price ("-V" at the end of model number)
ASK
Motor Change Option
Same Size Motor Change Price
ASK
Different Size Motor Change Price
ASK
Control Electronics
Motor Controller
See the corresponded motor controller
Motor Driver
See the corresponded motor driver
Motor Cable
See the corresponded motor cable
Remarks and Features
●Motorized X stage with Cross Roller Guide.
●The feed system uses high-resolution grinding screws.
●5-phase stepping motor used.
●Use of KOSMOS series controllers is recommended.
●Ultra high resolution typeUse a cable for 5 motor leads.
