YA07A-R103

Positioning Stages 【 Montblanc Series 】

Catalog data PDF View

※Actual cable length differs from the image

Price ASK

Drawings file

Drawing For Download

Connect Fig File

Specification (Mechanical)

Model Number

YA07A-R103

Mirror Model Number

YA07A-R103-RRR

Table Size

70mm×70mm

Guide Mechanism

Cross Roller Guide

Motion Range

±10mm

Lead Mechanism

Ground Screw, Lead 0.5mm

Resolution　Full/Half Step

0.5μm/0.25μm

Resolution　Micro Step (1/20 div)

0.025μm

Maximum Speed

2.5mm/sec

Accumulated Lead Error

≦ 10μm/20mm

Repeatability

≦±0.3μm

Lost Motion

≦ 1μm

Straightness (Horizontal)

≦ 0.5μm/20mm

Straightness (Vertical)

≦ 0.6μm/20mm

Backlash

≦ 1μm

Moment Load Stiffness

0.31 arcsec/N cm

Load Capacity

88.2N (9kgf)

Perpendicularity

≦ 5μm/20mm

Material

Aluminum Alloy

Finishing

Clear Matt Anodizing

Weight

1.7kg

Specification (Electrical)

Sensor Model

F-116(HOME, LIMIT), Mirror Model: F-116R(HOME, LIMIT)

Motor Shaft Diameter

Φ5mm , Conformance option handle：A type

5 Phase Stepper Motor

Oriental motor: PK544PMB

Connector

20Pin Round (Hirose: RP13A-12JG-20PC)

2 phase stepper motor is available

YA07A-R103-BM

2 Phase Stepper Motor

Oriental motor: PKP244D15B

2 Phase Stepper Motor Connector

20Pin Round (Hirose: RP13A-12JG-20PC)

Overhaul Price

ASK

*Additional parts cost is not included on Overhaul Price

Lubricant Change Option

Clean Room Lubricant Change Price ("-C" at the end of model number)

ASK

Vacuum Lubricant Change Price ("-V" at the end of model number)

ASK

Motor Change Option

Same Size Motor Change Price

ASK

Different Size Motor Change Price

ASK

*The Motor cost is not included on Motor Change Price

Control Electronics

Motor Controller

See the corresponded motor controller

Motor Driver

See the corresponded motor driver

Motor Cable

See the corresponded motor cable

Accessory

See the corresponded accessory as like spacer or bracket

Remarks and Features

●Motorized XY stage with Cross Roller Guide.
●The feed system uses high-resolution grinding screws.
●5-phase stepping motor used.
●Use of KOSMOS series controllers is recommended.
●Ultra high resolution typeUse a cable for 5 motor leads.

Back to List