Inelastic Measurement

Inelastic Measurement

<KIG-20B>

This base table is equipped with XY-carriers which allow smooth translations of heavy goniometers and other equipment in the horizontal plane. There are additional smaller carrier tables for positioning of light equipment such detectors along X-ray beam. The carriers are guided by linear rail guides. The carriers can be locked into desired positions by mechanical clamps. The top table can be rotated in a horizontal plane by pushing screws around the vertical pivot. Tilt and height alignment of the whole structure can be done manually by
adjustment bolts at the top. Photo shows KIG-20B with two KTG-11KW & KHI-7 and one RSG-7B & KHI-4SK assemblies mounted on the carriers.

High-Load XZ Stage

<KHI-4SK>

This KHI-4SK is consists of the Z stage as KHI-4S and X stage. It can translate to a position precisely while carrying a very heavy duty goniometer on it.

Two Axis Rotation

<RA20-21>

This two axis ( θ-2θ ) motorized rotation stage allows rotation independently of a sample with either a detector or analyzer mounted on a side arm.

High Precision Goniometer

<KTG-15D>

Kohzu's KTG-15 goniometers were specifically developed for use at high energy X-ray synchrotron facilities where precision angular displacement and
repeatability are essential. The goniometer's extreme resolution is attained by displacing a rotation spindle fitted with a long radially mounted arm, via a tangentially positioned and motorized micrometer head.

Ultra High Precision 2-Axis Goniometer

<KTG-11KW>

This goniometer has two parallel ultra high resolution rotation axes driven independently by two tangent bar mechanisms.

The goniometer was manufactured for use in high precision two crystal topograph set-up.

Ultra High Precision Coaxial Goniometer

<KTG-16W>

The device was manufactured for use as a high resolution 4-crystal asymmetric reflection monochromator.

The right picture shows it is installed in a chamber as a low vacuum type.